31^st AIAA/ASME/SAE/ASEE Joint Propulsion Conference

Sheraton Harbor Island Hotel
San Diego, California
July 10-12, 1995

Session 16-ORD-1 Ordnance Designs and Applications I

• AIAA-95-2407 "Augmented Shock Wave Severance of Materials," L.P. Bement, NASA Langley Research Center, Hampton, VA and M. L. Schimmel, Schimmel Company, St. Louis, MO
• AIAA-95-2408 "Interdisciplinary Technologies Applied to Trident II (D5) Eject Gas Generator Initiator," E.E. Tibbetts and D. R. Knick, EG&G Mound Applied Technologies; L.C. Allen, Sandia National Laboratories, Albuquerque, NM
• AIAA-95-2409 "Peacekeeper Flight Termination Ordnance System," J.A. Ramsey, USAF Space and Missile Systems Center, San Bernardino, CA; D.R. Sessler and L.C. Yang, TRW Strategic Systems Division, San Bernardino, CA
• AIAA-95-2410 "Solid Rocket Motor Separation Thruster, Ordnance Initiated, for the Delta Launch Vehicle," W.J. Casey, McDonnell Douglas Aerospace, Huntington Beach, CA
• AIAA-95-2411 "Precision Linear Shaped Charges for Rocket Motor Stage Separation," M. Vigil, Sandia National Laboratories, Albuquerque, NM (WITHDRAWN)
• AIAA-95-2412 "Effect of Lead Flyer in Bi-directional Destruct Charge," D. Jackson, Lockheed Martin, Denver CO  (WITHDRAWN)

Session 37-ORD-2 Ordnance Designs and Applications II

• AIAA-95-2543 "Detonator Development Activities at the Ensign-Bickford Company," D.W. Ewick, Ensign-Bickford Company, Simsbury, CT
• AIAA-95-2544 "Qualified Polymer Sheathed Explosive Cord in Aircrew Escape/Egress Systems," J.F. Ratts, Naval Surface Warfare Center, Indian Head Division, Indian Head, MD
• AIAA-95-2545 "New Safe and Arm Device," J. Sudick, Special Devices, Inc., Newhall, CA
• AIAA-95-2546 "Flight Safe and Arm Monitor and Command Circuits," W. J. Sipes, Special Devices, Inc., Newhall, CA
• AIAA-95-2547 "Performance Characterization of the NASA Standard Detonator," W. Tarbel, Sandia National Laboratories, Albuquerque, NM; T. Burke and S. Solomon, USBI, Huntsville, AL
• AIAA-95-2548 "Semiconductor Bridge Technologies," K.E. Willis and D. Whang, Quantic Industries, San Carlos, CA
• AIAA-95-2549 "An Overview of Semiconductor Bridge, SCB, Applications at Sandia National Laboratories," R. W. Bickes, Jr., M. C. Grubelich, S. M. Harris, J. A. Merson, J. H. Weinlein, Sandia National Laboratories, Albuquerque, NM
• AIAA-95-2550 "Unitary RF and Electrostatic Protection Device for EEDs," R.L. Dow, Attenuation Technology, LaPlata, MD

Session 62-ORD-3 Ordnance Education, Safety, and Diagnostic Tools

• AIAA-95-2701 "Use of Deep Penetration Flash Radiography in Conventional Ordnance, and Impact Dynamics Research and Development," D. Fradkin, Los Alamos National Laboratory, Los Alamos, NM
• AIAA-95-2702 "Use of VISAR Test to Replace Detonator Dent Test," B Neyer, EG&G Star City, Miamisburg, OH
• AIAA-95-2703 "Solid State Doppler Interferometer System for Velocity Measurement of Pyrotechnically Driven Actuators," K.J. Fleming and R.D. Wickstrom, Sandia National Laboratories, Albuquerque, NM; A. Agajanian, Jet Propulsion Laboratory, Pasadena, CA
• AIAA-95-2704 "Development and Production of Two Explosive Components Using SCB Technology," W. Tarbell and D. Sanchez, Sandia National Laboratories, Albuquerque, NM; M Oestreich and J. Prentice, Pacific Scientific, Chandler, AZ
• AIAA-95-2705 "The Design and Construction of a Small Arms Propellant Test Unit," C.S. Smith, M.K. Hudson, and P.C. McLeod, University of Arkansas at Little Rock, Little Rock, AR
• AIAA-95-2706 "Flight Termination System for Destruction of Unpressurized Solid Propellant Motors," L. Duce Thiokol Corporation, Bringham City, UT; T. Nenni, Reynolds Industries, Los Angeles, CA
• AIAA-95-2707 "Range Safety Ordnance Requirements," M.A. Gotfraind, USAF, 30^th SW/SESE, Vandenberg AFB, CA

Session 86-ORD-4 Ordnance Modeling and Analysis

• AIAA-95-2852 "Importance of Enhanced Test Data for Computer Modeling of Explosively Actuated Devices," S. Goldstein, Y. Lu, and T.E. Wong, The Aerospace Corporation, El Segundo, CA
• AIAA-95-2853 "Mathematical Modeling of the Ballistic and Mechanical Behavior of Ordnance Systems," P.G. Amand and J.A. Tiemon, Pryospace, Les Mureaux, France
• AIAA-95-2854 "Computer Modeling of Electrical Performance of Detonators," G.R. Peevy, and W.P. Brigham, Sandia National Laboratories, Albuquerque, NM ; C.M. Furnberg, Sandia National Laboratories, Livermore, CA
• AIAA-95-2856 "Analysis of the Super*Zip Upper Bound Performance Margins," S. Goldstein and B.W. Sun, The Aerospace Corporation, El Segundo, CA
• AIAA-95-2857 "New High-Nitrogen Energetic Materials for Gas Generators in Space Ordnance," M. Stinecipher, K. Lee, and M.A. Hiskey, Los Alamos National Laboratory, Los Alamos, NM
• AIAA-95-2858 "Chemistry and Development of BNCP: A Novel DDT Explosive," J. Fronabarger, A. Schuman,  R. Chapman, W. Fleming, and W. Sanborn, Pacific Scientific Energy Dynamics Div., Chandler, AZ; T. Massis, Sandia National Lab, Albuquerque, NM;

Session 104-ORD-5 Ordnance Advanced Concepts

• AIAA-95-2979 "Laser Initiated Ordnance System Test and Integration for NRL's ARTS Program," M. Bahrain, Naval Research Laboratory, Washington DC; M. Fratta, Allied Signal Technical Services, Washington, DC; C. Boucher, Ensign-Bickford Aerospace Company, Simsbury, CT
• AIAA-95-2980 "Flight Demonstration of Flight Termination System and Solid Rocket Motor Ignition Using Semiconductor Laser Initiated Ordnance," N.R. Schulze, NASA Headquarters, Washington, DC; B. Maxfield, NASA Wallops Flight Facility, Wallops Island, VA; C. Boucher, Ensign-Bickford Company, Simsbury, CT
• AIAA-95-2981 "Laser Sequencing for Aircrew Escape Applications," T. J. Blachowski, Indian Head Division, Naval Surface Warfare Center, Indian Head, MD and P.P. Ostrowski, Energetic Materials Technology, Alexandria, VA
• AIAA-95-2982 "Flight Demonstration of Laser Diode Initiated Ordnance," C. Boucher, Ensign-Bickford Company, Simsbury, CT; N.R. Schulze, NASA Headquarters, Washington, DC
• AIAA-95-2983 "Development of Hermetic Sealing Processes for Use in the Fabrication of Laser-Ignited Energetic Components," D. P. Kramer, A. C. Munger, and L. R. Dosser, EG&G Mound Applied Technologies, Miamisburg, OH
• AIAA-95-2984 "Shape Memory Alloys in Aerospace Applications," M. D. Bokaie, V. Martnov, and R. Turovskiy, TiNi Alloy Company, San Leandro, CA
• AIAA-95-2985 "Electro-Mechanical Actuators for Remote Actuation Requirements," C. Courtney, R. Stephenson, and T. Moran, G&H Technology, Camarillo, CA (WITHDRAWN)
• AIAA-95-2986 "The Utilization of High Output Parifin Actuators in Aerospace Applications," J. Priebe, Starsys Research Corp., Boulder, CO

Return to Past Energetic Components and Systems Conferences